Toshiba 3000 - Online Operation Initializing Process Flow

6F8C1048 83
6.1Preparations and Procedures for Start
6
6.1.6 Online operation initializing process flow
The initializing items of a general application program for online operation are shown in
the flowchart of figure 6-2.
Figure 6-2 Online Operation Application Initializing Process Flow
start
stop
Inring request
(Engaging in ADMAP-5M
transmission)*1
Registering and setting
scan transmission cycles,
monitor cycles, and
transmission blocks
Scan transmission start
Online request
(Start of scan
transmission, etc.)*1
*1: To be skipped if AO in
Table 3-2 is ON.