2 model 3000 ADMAP-5M AN712 Module User’s Manual
Chapter 1 Overview
1
Features of the AN712 Module
The AN712 module is used for connecting the process control LAN ADMAP-5M to the
Integrated Controller V Series model 3000.
Data can be exchanged between the connected devices on the ADMAP-5M and
connected devices of the Integrated Controller V Series.
ADMAP-5M has the following features.
•Open
• Communication service
There are three scan transmission modes, that is, high speed, medium speed, and low
speed, which may be chosen as appropriate to the data refreshing cycle to secure
deterministic real time response.
MMS, LLC Type 1, and LLC Type 3 of message transmission are supported.
• Highly reliable
The dual transmission line design permits highly reliable system configuration.
Figure 1-2 Example of System Configuration
電源
CPU
EN**
AN712
Ｖシリーズ model3000
V ｼﾘｰｽﾞ
ｍodel2000
V ｼﾘｰｽﾞ
ｍodel3000
イーサネット
OIS
PCS
FA
3100
DPCS
ADMAP-5M
V series model 3000
Power unit
Ethernet
V series V series
model 2000 model 3000
To Next Page
Loading...
