Toshiba 3000 User Manual

76 model 3000 ADMAP-5M AN712 Module User’s Manual
Chapter 5 Application Interface
5
<Response status>
<Note>
• The maximum number of high, medium, and low-speed blocks that can be set is 110 in
total.
• If a scan transmission is already registered and has started, stop it before requesting
registration.
0x0000 Normal end
0x0201 Text length error
0x0203 Error in the number of transmission blocks set
0x0204 Error in the range of transmission block numbers
0x0205 Transmission blocks duplicated
0x0206 Scan transmission registration requested during scan transmission
0x0207 Scan transmission requested while scan transmission is inhibited (by DIP-
SW setting)
0x0208 Total number of scan transmission blocks over limits
0x0209 Number of continuous scan blocks over the specified range
0x0211 Low-speed transmission mode setting error
0x0212 Medium-speed transmission mode setting error
0x0213 Medium/low-speed transmission mode error
0x0214 High-speed transmission mode error
0x0215 High/low-speed transmission mode error
0x0216 High/medium-speed transmission mode error
0x0217 High/medium/low-speed transmission mode error

Toshiba 3000 Specifications

General

Brand	Toshiba
Model	3000
Category	Controller
Language	English