Toshiba BA400 Series - Page 126

121
The following message is displayed depending on the module type setting, the mounted module type, and the
module mount condition.
Module Type
parameter
Module type and status
Message
NONE
No module installed.
NONE
U4
No module installed.
No RFID Module
BA704-RFID-U4-S
BA704-RFID-U4-KR-S
BA704-RFID-U4-EU-S
BA704-RFID-U4-AU-S
preinstall model
Country of use
set (*1)
[PAUSE] for Setting
No country
setting
Need Setting for use
[PAUSE] for Setting
*1: Selectable country codes differ depending on the RFID module type. Multiple country codes may be
displayed when setting a country code, but be sure to select the country where the RFID module is used.
Setting a different country code is prohibited.
Refer to “Module revision and LCD display” in “8.4.2. AUTO DIAGNOSTIC” for the countries where each
RFID module is used.
8.10.2.3 TAG
Set the tag type of the RFID module.
* Selectable tag types vary according to the module setting.
When using RFID with BA400, set module type with U4 and tag type with EPC C1 Gen2.
Module type
Tag type
NONE
NONE
I-Code
Tag-it
C220
ISO15693
C210
C240
C320
EPC C1 Gen2
UHF band (U4)
NONE
EPC C1 Gen2