Toshiba BA400 Series - Page 30

25
11
RIBBON ERROR
●

▪ A ribbon has end.
▪ An abnormal condition occurred
with the sensor for determining the
torque of the ribbon motor.
▪ A ribbon jam occurred.
▪ The ribbon has been torn.
▪ The ribbon has not been set.
Yes
Yes
12
FRONT COVER
OPEN
●

Printer will print with Front Cover
Opening..
Yes
Yes
13
SAVING ####KB/&&&&KB
or
SAVING %,%%%.%%%KB

●
External characters or PC
command save mode.
---
Yes
14
FORMAT ####KB/&&&&KB
or
FORMAT %,%%%.%%%KB

●
Initializing the storage area.
---
Yes
15
NOW LOADING…

●
Downloading TrueType font or
BASIC program
---
Yes
16
SETTING MODE
Do not turn the
Printer off

●
In setting mode
---
No
17
MEMORY WRITE
ERR.
●

An error has occurred while writing
data into the memory for storage.
(USB memory, flash ROM on the
CPU board)
No
Yes
18
FORMAT ERROR
●

An erase error has occurred while
formatting the memory for storage
(USB memory, flash Rom on the
CPU board)
No
Yes
19
MEMORY FULL
●

Saving failed because of the
insufficient capacity of the memory
for storage (USB memory, flash
ROM on the CPU board)
No
Yes
20
SYNTAX ERROR
Command error
(Refer to Notes 1 and 2)
●

A command error has occurred
while analyzing the command.
Yes
Yes
21
POWER FAILURE
●

A momentary power interruption
has occurred.
(The LCD message may corrupt
before the error message is
displayed.)
No
No