Toshiba BA400 Series - Page 50

45
* Refer to “8.8.3.1 Parameters to be cleared ” for the initial value after RAM clear.
<< BLUETOOTH >>
BLUETOOTH [ON]
DEVICE NICKNAME [TOSHIBA TEC BT]
[ ]
BD ADDRESS [00:16:A4:08:CF:8D]
FACTORY TEST [OFF]
INQUIRY [EVERY]
SECURITY [SPP]
SCAN INTERVAL [2048]
SCAN WINDOW [36]
AUTO CONNECT [OFF]
SSP AUTH [JUST WORKS]
<< RFID >>
MODULE TYPE [NONE]
TAG TYPE [NONE ]
RF CHANNEL [AUTO]
RETRY POSITION [+00mm]
RETRY LABELS [ 3labels]
READ RETRY [ 5times] [4.0sec]
WRITE RETRY [ 5times] [4.0sec]
POWER LEVEL [ 0]
Q VALUE [ 0]
AGC THRESHOLD [ 0]
WRITE AGC [ 0]
RETRY MIN AGC [ 0]
TAG CHECK [PASSWORD] [ON] [ON]
MULTI WRITE [OFF]
CALIB. MODE [OFF]
ENCODE POSITION [+000.0mm]
SUCCEEDED TAGS 9999999
VOID PRINT TAGS 9999999
<< RTC >>
BATTERY CHECK [ON]
RENEWAL [start of JOB]