4-4
ENTERING & SETTING ITEMS
4
The Character Table lists special characters that can be entered when programming this facsimile.
The table lists the alpha keys in the left column and the characters that correspond to each key in the
right column.
To enter the special characters entry mode, press the [ALTERNATE] key on the keyboard.
Pressing the alpha key displays the special characters you can enter.
Select your desired character by using the
or keys, and press .
Uppercase special characters can be selected by pressing the alpha key while holding down the [SHIFT]
key after the [ALTERNATE] key is pressed.
Special Character Table
1. ENTERING CHARACTERS (Cont.)
To Next Page
Loading...
