4-31
4
1
Displaying the RECOVERY TX Menu.
Press:
then
Setting Recovery Transmission
Recovery Transmission allows the operator to retransmit a document after failing the initially specified
number of redial attempts.
If Recovery Transmission is set to ON, the document is stored in memory for a specified length of time.
You may retransmit the document during this time period without rescanning the original document.
2
Select the Recovery Transmission option.
• To turn OFF Recovery Transmission, press .
• To turn ON Recovery Transmission, press
.
Go to Step 3.
3
Using the or key, select the stored time
length (01 to 24 hours) and press the
key.
RECOVERY TRANSMIT
1.OFF
2.ON
RECOVERY TRANSMIT
STORE 24 HOURS
TIME : 08
01 HOUR
FAX SETUP
11.RECOVERY TRANSMIT
12.TTI
13.SEND AFTER SCAN
To Next Page
Loading...
