Toshiba e-studio 16 - Relay Transmission to a Remote Hub

3
3-22
HANDY FEATURES
2
Place the original.
• For details on how to place the originals on the original glass.
(
See page 2-8.)
This section describes the procedure to send a document to Relay Box in a remote hub.
• The remote hub must be compliant with ITU-T F-code communications.
Note
The destination relay box must be set up in the remote hub unit prior to sending a document.
9
Dial the FAX number of the remote hub unit.
8
Enter the password for reservation and press the
key.
7
Select the password option.
• If the remote hub unit has a password programmed, press
. Go to Step 8.
• If the remote hub does not have a password programmed,
press
. Go to Step 9.
6
Enter the box number and press the key.
5
To select “3. RELAY,” press the .
4
Display the MAILBOX Menu.
Press:
3
Set the scanning conditions. ( See pages 2-10 to
2-15.)
SEND(RELAY)
BOX NUMBER (MAX20):
SEND(RELAY)
PASSWORD (MAX20):
MAILBOX TYPE
1.CONFIDENTIAL
2.BULLETIN BOARD
3.RELAY
SEND(RELAY)
PROGRAM PASSWORD?
1.YES
2.NO
SEND(RELAY)
ENTER TEL NUMBER OR,
PRESS SPEED DIAL KEY
OR ONE TOUCH KEY
1
Press the key.
7. RELAY TRANSMISSION (Cont.)
Relay Transmission to a Remote Hub