3
3-6
HANDY FEATURES
4. LOW SPEED TRANSMISSION
If communication errors frequently occur while transmitting documents due to bad phone lines, we
recommend you to select a lower transmission speed to enable quality transmissions.
• The transmission speed will be restored to the default value automatically after the low speed
transmission is completed.
4
Specifying the remote FAX and press the key.
(
See pages 2-16 to 2-21.)
3
Select the desired bit rate.
• To select OFF, press .
• To select 14400 BPS, press
.
• To select 9600 BPS, press
.
• To select 4800 BPS, press
.
QUALITY TX
1.OFF
2.14400 BPS
3. 9600 BPS
QUALITY TX
2.14400 BPS
3. 9600 BPS
4. 4800 BPS
1
Press the key.
2
Press the key (on the Function key panel) and
resend the original.
Note
LOW SPEED TX takes longer than regular transmission as
the documents are sent at a slower bit rate.
To Next Page
Loading...
