4-39
4
Secure RX Security Code Setting
There are occasions when you may wish to secure access to incoming documents. Secure RX allows
you to receive documents to memory until a security code is entered. This ensures that only users with
the correct security code may retrieve documents. In addition, the Secure RX can be setup to automatically
be activated during a specified time period.
To setup Secure RX, a 4-digit security code must be programmed first. After programming the security
code, you can specify the time period during which the Secure RX will be active. 24-hour coverage for
specific days of the week is selectable. This section describes the procedure for programming a security
code or changing an existing security code.
1
Displaying the SECURE RX Menu.
Press:
then
2
To select the Security Code for the first time or to
change an existing Security Code, press
.
3
New Security Code Setting:
Enter a 4-digit password and press the
key.
Change an Existing Password:
If the security code already exists, and you wish to
change the current password, enter the current
password and press the
key.
Then enter your new 4-digit password and press the
key.
SECURE RX
1.SECURITY CODE
2.ACTIVATE
SECURITY CODE
ENTER CURRENT CODE:
SECURITY CODE
ENTER NEW SECURITY CODE:
To Next Page
Loading...
