2-25
2
• Even if the Memory TX Mode is selected as the Default, you may desire to transmit a specific original(s)
in the Direct TX Mode.
• This feature is useful when the document consists of many pages or the when the residual memory is
too small.
Temporary Direct TX
3
Set the Scanning conditions. ( See pages 2-10 to
2-15.)
2
Place the original.
• For details on how to place the originals on the original glass.
(
See page 2-8.)
4
Press the key.
DIRECT TRANSMIT
1.YES
2.NO
5
Select the desired Direct TX Option.
• To select “1.YES”, press key.
• To select “1.NO”, press
key.
• To cancel setting midway, press the key.
6
Dial the remote FAX number. ( See pages 2-16 to
2-21.)
• The remote FAX is dialed immediately, and communications
is started.
• A group cannot be designated as a remote FAX number.
ENTER TEL NUMBER(MAX128):
FEB25-2001 11:30AM M :100%
RESOLUTION:STANDARD
:AUTO
COMM.OPTION
DIALING
JOB NUMBER : XXX
12345
COMMUNICATING
JOB NUMBER : XXX
12345
1
Press the key.
To Next Page
Loading...
