Toshiba e-studio 16 - Entering Abbreviated Dialer Registration

4-8
ENTERING & SETTING ITEMS
4
7
To select “5.COMM. OPTIONS,” press .
• To skip the Communication Options, press .
6
To select “4.2nd TEL NUMBER,” press . Then
enter the alternate fax number if the remote location
has two or more faxes (optional setting) and press
the
key.
Entering Abbreviated Dialer Registration
2
Displaying the Abbreviated Numbers Menu.
Press:
then
3
Enter an Abbreviated Dial Number from 1 to 999 and
press the key.
4
To select “2. NAME,” press . Then enter the name
of the remote FAX (up to 20 characters) and press
the
key.
5
To select “3. TEL NUMBER,” press . Then enter
the telephone number you want to store (up to 128
digits) and press the key.
ABB. NUMBER
ENTER ABB. NUMBER (1-999):
ABB. NUMBER 001
ENTER TEL NUMBER(MAX128):
767717
ABB. NUMBER 001
ENTER 2nd TEL NUMBER:
767669
COMM. OPTIONS
1.OFF
2.ON
ABB. NUMBER 001
1.COMPLETE
2.NAME
3.TEL NUMBER
4.2nd TEL NUMBER
5.COMM. OPTIONS
Note
“NAME” and “TEL NUMBER” must be entered.
Unless either one is entered, registration will not be completed.
In this case, upon selecting “COMPLETE”, the display shows
“No destination” for a while, then will be restored to the status
just before the operation.
ABB. NUMBER 001
ENTER ID NAME(MAX20):
LONDON OFFICE
1
Press the key.
COMM. OPTIONS
1.COMPLETE
2.DELAYED COMM.
3.TX REPORT
• To select default settings, press . If one or more of the
following Communication Options are to be set for this
Abbreviated Dial Number.
2. ENTERING THE REMOTE FAX NUMBER (Cont.)