4-9
4
D To select “5. QUALITY TX,” press .
• Select to program a lower speed communication.
(Refer to the description of the
key.)
ETo select “6. SUB ADDRESS,” press .
• Selected only when the remote FAX requires one.
(Refer to the description of the
key.)
8
After you have done all required settings, select
“1.COMPLETE.” The first ABB. NUMBER ENTRY
screen is displayed.
9
Press the desired One Touch Key if you want to
assign the registered Abbreviated Dial to a One
Touch ( to ) Key. Press the key if
you do not want to assign the registered Abbreviated
Dial to a One Touch Key.
A To select “2. DELAYED COMM,” press
.
• Select to program a transmission start time.
(Refer to the description of the
key.)
B To select “3. TX REPORT,” press .
• Set whether or not to print a TX report.
(Refer to the description of the
key.)
C To select “4. LINE MONITOR,” press .
• Select to program the line monitor speaker during dialing.
TX REPORT
1.OFF
2.ON
QUALITY TX
1.OFF
2.14400 BPS
3. 9600 BPS
DELAYED COMM.
TIME : HH :MM
10 :10 AM
ABB. NUMBER 001
ONE TOUCH : 02
LONDON OFFICE
LINE MONITOR
1.OFF
2.ON
SUB ADDRESS
1.COMPLETE
2.SUB ADDRESS(SUB)
3.SELECTIVE POLLING(SEP)
• To cancel programing press the key.
ABB. NUMBER 001
PRESS ONE TOUCH KEY
TO ENTER OR
[SET]:TO SKIP
To Next Page
Loading...
