Toshiba e-studio 16 - Delayed Communication (Time Designation)

3-3
3
1. DELAYED COMMUNICATION (TIME DESIGNATION)
• This function allows you to send originals to a remote FAX at a specified time and specified day. This
function comes in handy when you want to make use of off-peak discounts (e.g. night-time) and make
use of time differences when sending overseas. You can reserve a transmission up to one month in
advance.
• You can set the time (hours/minutes) and the day (DD).
2
Place the original.
• For details on how to place originals on the original glass.
(
See page 2-8.)
3
Set the scanning conditions. ( See pages 2-10 to
2-15.)
4
Press the key (on the Function key panel).
5
Enter the time (hours/minutes) and day (DD) using
the digital keys. Press the
or key to move the
cursor.
6
Press the key to complete settings.
• To cancel setting midway, press the key.
• To correct the entered value, highlight the character using
the
key and overwrite on it.
• The time function corresponds to the date and time setting
within the Copier functions. (Refer to the Operator’s Manual
(For Copying Functions).)
• Select “AM” or “PM” when the time is displayed in the
12-hour format.
7
Specify the remote FAX, and press the key.
SCANNING TO MEMORY
JOB NUMBER : XXX
SCANNING PAGE : YYY
RESIDUAL MEMORY : ZZZ%
DELAYED COMM.
TIME : HH :MM DD
08 :10AM 15
DELAYED COMM.
TIME : HH :MM DD
: PM
1
Press the key.