Toshiba e-studio 16 - Secure RX Manual Activation

4
4-42
ENTERING & SETTING ITEMS
3. ENTERING VARIOUS FUNCTIONS (Cont.)
2
Press the key (on the Function key panel).
3
To start manual activation, press .
This section describes the procedure to manually activate Secure RX.
Note
In order to manually activate Secure RX, you must first activate Secure RX by going through the
Secure RX Security Code setting. (
See page 4-39.)
SECURE RX
1.START
2.PRINT
Note
If Secure RX Activation is set to OFF in the Secure RX
Activation Period Setting, the message “Feature not enabled”
will be displayed for 2 seconds, and the screen returns to the
Standby Mode.
1
Press the key.
Secure RX Manual Activation