Toshiba e-studio 16 - Send after Scan Default Setting

4
4-34
ENTERING & SETTING ITEMS
3. ENTERING VARIOUS FUNCTIONS (Cont.)
1
Displaying the SEND AFTER SCAN Menu.
Press:
then
Send After Scan Default Setting
This feature enables you to determine whether dialing starts while the machine is scanning the documents
or after the machine has scanned all documents in the Memory Send mode.
2
Select the Send After Scan option.
• To disable Send After Scan, press .
• To send the pages after scan, press
. Go to step
3.
3
Select the Memory Full option.
• To delete the pages that have been scanned, press .
• To send the pages already scanned to memory, press
.
SEND AFTER SCAN
01.DIAL DURING SCAN
02.DIAL AFTER SCAN
WHEN MEMORY FULL
1.DELETE SCAN PAGES
2.SEND SCAN PAGES
FAX SETUP
13.SEND AFTER SCAN
14.ACCOUNT CODE
15.SEPARATOR PAGE