3-17
3
What is a “Relay Transmission”?
A relay transmission is used to send documents from your facsimile (originator) to a Hub Station,
which then sends them to additional end stations. If you have several stations in one or more regional
areas (e.g. Los Angeles Metro, New York City, Dallas-Ft. Worth, Seattle-Tacoma, etc.); you can save
time and phone charges by setting up a relay system. By sending your document to a Hub Station,
you can then instruct the Hub Station to retransmit the document to the end stations in their local
geographical area.
7. RELAY TRANSMISSION
Relay Transmission, Relay-Relay Transmission Overview
End Station Group
(stations to finally
receive the document)
Originator
Station
Hub
Station
End Station
What is a “Relay-Relay Transmission”?
A Relay Transmission where two levels of Hub Stations are involved is called a Relay-Relay
Transmission. In a Relay-Relay Transmission, the first Hub Station sends the document to another
Hub Station(s) which then transmits them to additional end stations.
Second
Hub Station
Second
Hub Station
End Station Group
(stations to finally
receive the document)
End Station
End Station
End Station
Originator
Station
Hub
Station
To Next Page
Loading...
