Toshiba e-studio 16 - Relay Transmission Originator Report

4
4-70
ENTERING & SETTING ITEMS
4. OUTPUTTING LISTS & REPORTS (Cont.)
Relay Transmission Originator Report
This is the result report the Originating Terminal prints after initiating a Relay Transmission.
Auto Print (if programmed;
see page 4-57.)
Printing will automatically start after the originating station transmits the document to the hub station
successfully or unsuccessfully.
RELAY TX ORIG. TERMINAL REPORT
PAGE : 001
TIME : FEB-25-2001 11:48AM
TEL NUMBER : 12345678901234567890
E-MAIL : ABCDEFGHIJKLMNOPQRSTUVWXYZ12345678901234
NAME : ABCDEFGHIJKLMNOPQRSTUVWXYZABCDEFGHIJKLMN
FILE NUMBER : 999
DATE : FEB-25 09:50AM
TO : ABCDEFGHIJKLMNOPQRST
RELAY BOX : 12345678901234567890
DOCUMENT PAGES : 999
START TIME : FEB-25 10:00AM
END TIME : FEB-25 10:20AM
SENT PAGES : 995
STATUS : OK
FILE NUMBER : 004
*** SEND SUCCESSFUL ***
//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
image data
//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
Job number of the relay transmission (indicated in 3 digits (001 ~ 999))
Date and time when the relay transmission was performed
Relay group’s name
Relay box number
Number of transmitted pages (indicated in 3 digits (001 ~ 999); more than 1000 is
indicated as “999”.)
Time when the transmission started
Time when the transmission was completed
Number of pages sent normally before an error occurred.
Result: OK/NG
The image data on page 1 is reduced and printed.