Toshiba e-studio 16 - Relay Originator Report Setting; Relay Station Transmission Report Setting

4-57
4
1
Displaying the RELAY ORG. REPORT Menu.
Press:
then
2
Select the desired option to print a report whenever
a Relay transmission is sent.
• To always print a Report whenever a document is
transmitted, press
. Go to Step 3.
• To only print a Report when an error has occurred, press
. Go to Step 3.
• To turn OFF automatic printing of this Report, press .
3
Select the option for first page image.
• To not print an image of the facsimile document on the
transmission report, press
.
• To print an image of the facsimile document on the
transmission report, press
.
RELAY ORIGINATOR REPORT
1.ALWAYS
2.ON ERROR
3.OFF
PRINT 1st PG IMAGE?
1.OFF
2.ON
COMMUNICATION REPORT
05.RELAY ORIGINATOR REPORT
06.RELAY STATION REPORT
07.RELAY END REPORT
1
Displaying the RELAY STN. REPORT Menu.
Press:
then
2
Select the desired option to print a report when this
facsimile is used as a relay hub station. This report
is printed by the hub station to end terminals.
• To always print a Report, press . Go to Step 3.
• To only print a Report when an error has occurred, press
. Go to Step 3.
• To turn OFF automatic printing of this Report, press .
3
Select the option for first page image.
• To not print an image of the document, press .
• To print an image of the document, press
.
RELAY STATION REPORT
1.ALWAYS
2.ON ERROR
3.OFF
PRINT 1st PG IMAGE?
1.OFF
2.ON
COMMUNICATION REPORT
05.RELAY ORIGINATOR REPORT
06.RELAY STATION REPORT
07.RELAY END REPORT
Relay Originator Report Setting
Relay Station Transmission Report Setting