4-11
4
A To select “2. DELAYED COMM,” press .
• Select to program a transmission start time.
(Refer to the description of the
key.)
B To select “3. TX REPORT,” press .
• Set whether or not to print a TX report.
(Refer to the description of the
key.)
C To select “4. LINE MONITOR,” press .
• Select to program the line monitor speaker during dialing.
D To select “5. QUALITY TX,” press .
• Select to program a lower speed communication.
(Refer to the description of the
key.)
8
After you have completed all the desired settings,
select “1.COMPLETE.”
ETo select “6. SUBADDRESS,” press
.
• Selected only when the remote FAX requires one.
(Refer to the description of the
key.)
QUALITY TX
1.OFF
2.14400 BPS
3. 9600 BPS
4. 4800 BPS
SUB ADDRESS
SUB(MAX20):
ONE TOUCH KEY 05
PRESS ONE TOUCH KEY:
TX REPORT
1.OFF
2.ON
LINE MONITOR
1.OFF
2.ON
SUB ADDRESS
1.COMPLETE
2.SUB ADDRESS(SUB)
3.SELECTIVE POLLING(SEP)
DELAYED COMM.
TIME : HH :MM
10 :10 AM
• To cancel programing press the key.
To Next Page
Loading...
