4-63
4
Mode (The communication mode and added function are indicated.)
EC 5 0 1 P
The communication mode is classified as shown below:
Communication Mode Indication
G3 G3
ECM (*) EX
ECM EC
ML Email
HW, HR RDC communication
Result: The result of the transmission is indicated. If the transmission failed, an error
code is indicated. When a transmission was completed normally, nothing is
indicated.
NG 20
Error code
Result: OK (Successful)
NG (Failure)
(*): Toshiba shortened protocol version of the original mode is used.
Encoding method
0: MH 2: MMR
1: MR 3: JBIG
Resolution (pels/mm)
0: 8 × 3.85 4: 16 x 15.4
1: 8 × 7.7 8: 300 dpi
2: 8 × 15.4
Transmission speed (bps)
0: 2400 4: 12000
1: 4800 5: 14400
2: 7200 6: V.34
3: 9600
Communication mode
Special communication mode (P: Polling, R: Relay transmission)
P: Polling Communication
SR, R: Relay Communication
SB: F-code Mailbox Communication
S: Sub Address Communication
I: PC-Fax Communication
To Next Page
Loading...
