Toshiba e-studio 16 - Page 41

2-15
2
7
Set the items to change.
• To change resolution, press .
(
See page 2-10.)
• To change image density, press
.
(
See page 2-12.)
• To change original size, press
.
(
See step 5.)
• When you have finished setting the items, press
.
SCANNING TO MEMORY
JOB NUMBER :XXX
SCANNING PAGE :YYY
RESIDUAL MEMORY :ZZZ%
BUILD FAX JOB
1.SCAN NEXT ORIGINAL
2.CHANGE CURRENT SETTING
3.COMPLETE
After scanning
8
Scanning the Next Sheet.
• To scan the next sheet, press .
After scanning the sheet, return to step 6.
• After scanning all sheets, to select “3.COMPLETE” press
.
Start the transmission.
BUILD FAX JOB
1.SCAN NEXT ORIGINAL
2.CHANGE CURRENT SETTING
3.COMPLETE
6
Select Build job Item.
• If there are no other sheets to scan, press .
Start the transmission.
• If you want to leave the scanning conditions unchanged,
press
.
After scanning the next sheet, return to this step.
• If you want to change the scanning conditions, press
.
Go to step 7.