3-29
3
6
To select “4. END,” press .
• Set the end date using or key.
• The end time is automatically calculated and displayed after
pressing the
key.
8
To select “2.ENTER TEL NUMBER(S)”, press .
• Enter the number of the remote FAX. ( See pages 2-16
to 2-21.)
7
To select “7. SECURITY,” press .
• Set the 4-digit security code if necessary.
PROG.CONT.POLL.
END DATE
FRI
PROG.CONT.POLL.
SECURITY CODE
PROG.CONT.POLL.
ENTER TEL NUMBER OR,
PRESS SPEED DIAL KEY
OR ONE TOUCH KEY
PROG. CONT. POLL.
1.ADD NEXT NUMBER
2.COMPLETE
9
When all the addresses are entered, select
“2.COMPLETE”. To enter the next remote FAX
address, select “1.ADD NEXT NUMBER” and return
to step 8.
• The procedure is now complete. The display returns to the
Standby Mode. The facsimile will automatically start polling
at the time set in this procedure.
Operation completed
JOB NUMBER :XXX
To Next Page
Loading...
