3.BASIC COPY MODES
Selecting Finishing Mode 73
3 BASIC COPY MODES
2
Select the desired paper size.
Sizes are available as follows:
Magazine sort: A3, A4-R, A5-R, B4, B5-R, LD, LT-R, LG, ST-R
Magazine sort & saddle stitch, Saddle stitch: A3, A4-R, B4, LD, LT-R, LG
4
Place the original(s).
When placing the originals on the RADF (optional), place them according to the illustration on the previous page.
When placing the originals on the original glass, place them in the following order:
Magazine sort, Magazine sort & saddle stitch: Place the first page of the original first.
Saddle stitch: For example, if the total number of pages is 12, place pages 1 and 12 together, and then pages
2 and 11, then pages 10 and 3, then pages 4 and 9, then pages 8 and 5, then pages 6 and 7.
5
Press [FINISHING] on the touch panel.
6
Select the desired mode from [MAGAZINE SORT], [MAGAZINE SORT & SADDLE
STITCH] and [SADDLE STITCH].
[MAGAZINE SORT & SADDLE STITCH] and [SADDLE STITCH] are selectable only when the Saddle Stitch
Finisher (optional) is installed.
3
For stitching large-size paper such as A3, B4, LD and
LG using the Saddle Stitch Finisher MJ-1024
(optional), lift the stopper of the saddle stitch tray.
To Next Page
Loading...
Need help?
General
