Toshiba e-STUDIO2830C Copying Guide

3 BASIC COPY MODES
74 Selecting Finishing Mode
7
Select other copy modes as required, and then press the [START] button on the control
panel.
 Requirements for saddle stitching
Saddle Stitch Finisher MJ-1024
Saddle Stitch Finisher MJ-1025
*1 When the paper weights are mixed, take the value of the heavier one.
*2 1 cover sheet (MJ-1024: 64 to 209 g/m
2
(17 lb. Bond to 110 lb. Index), MJ-1025: 64 to 128 g/m
2
(17 to 34 lb. Bond)) can be added. In this
case the number of sheets per set shall include the cover sheet.
Paper size
Paper weight
*1
Maximum number of sheets
available for saddle stitching
*2
Maximum number of sets loadable
on the saddle stitch tray
A3, A4-R, B4, LD,
LT-R, LG
64 - 80 g/m
2
(17 - 20 lb. Bond)
15 sheets
11 - 15 sheets / 10 sets
6 - 10 sheets / 20 sets
Less than 5 sheets / 25 sets
81 - 105 g/m
2
(21 - 28 lb. Bond)
10 sheets
6 - 10 sheets / 15 sets (5 sets if the
cover sheet is added)
Less than 5 sheets / 25 sets (5 sets if
the cover sheet is added)
Paper size
Paper weight
*1
Maximum number of sheets
available for saddle stitching
*2
Maximum number of sets loadable
on the saddle stitch tray
A3, A4-R, B4, LD,
LT-R, LG
64 - 80 g/m
2
(17 - 20 lb. Bond)
10 sheets
6 - 10 sheets / 10 sets
Less than 5 sheets / 20 sets
81 - 90 g/m
2
(21 - 24 lb. Bond)
6 sheets

Toshiba e-STUDIO2830C Specifications

General

Brand	Toshiba
Model	e-STUDIO2830C
Category	All in One Printer
Language	English