Toshiba RBP-RC001-E - MC Information; UC Information; Circuit Information

32RCA001TS-02ISEN
22
RBP-RC001-E Installation & Owner's Manual
MC Information
UC Information
Circuit Information
You can switch the displayed item to another, using [Λ] and [V].
Use [<] and [>] to move the MC-Sys cursor.
Use [●] (Confirm) to move to the UC information screen.
Use [ON]/[OFF] to run/stop the entire system.
Use [ ] (Menu) to move to the Menu screen.
You can switch the displayed item to another, using [Λ] and [V].
Use [<] and [>] to move the UC cursor.
Use [●] (Confirm) to move to the circuit information screen.
Use [ON]/[OFF] to run/stop the entire unit.
Use [ ] (Menu) to move to the Menu screen.
You can switch the displayed UC to another, using [<] and [>].
Use [ON]/[OFF] to run/stop the entire circuit.
Use [ ] (Menu) to move to the Menu screen.
Displays the current operating state of the system.
Displays the current operating state.
Displays the operation mode.
Displays the current MC number.
Displays the operation pattern.
Displays the current operating state.
Displays the operation mode.
Displays the operation pattern.
Displays the current UC number.
Displays the operation pattern of the system.
Displays the current system number.
Displays the operation mode of the system.