Toshiba RBP-RC001-E - Installation; Power, Signal, Earth and Communication Line Connections

32RCA001TS-02ISEN
8
RBP-RC001-E Installation & Owner's Manual
Installation
Power, Signal, Earth and Communication Line Connections
Connect the power, signal earth and communication lines to the specified terminal blocks.
Attach round crimp terminals to all wiring and tighten the screws securely.
After tightening, check that the wiring cannot come out.
About Stripping Length
Power supply wire stripping length
N
L
Attach a round crimp terminal to each wire of the power supply wire.
Power supply wire
Round crimp terminal
A: RS485-A(+)
B: RS485- B(-)
G: RS485-GND
Cutting (insulating)
Drain wire (grounding the frame)
(Insulate so that it does not short-circuit with the terminal block or other wiring.)
Communication wire stripping length Signal wire stripping length