Toshiba RBP-RC001-E - Product Info; Check of I;O

32RCA001TS-02ISEN
43
RBP-RC001-E Installation & Owner's Manual
Product Info.
Check of I/O
Check of Digital Input
You can check the function that is set for each terminal and its state.
Check of Digital Output
[CAUTION]
In the case of External or during running, you cannot operate digital outputs.
Before checking digital outputs, stop the devices.
On the Maintenance screen, select “Product Info.” and
press [●] (Confirm).
The Model, Serial No., Software No., and OS No. are displayed.
On the Maintenance screen, select “Check of I/O” and
press [●] (Confirm).
Digital Input check screen
Digital Output check screen
1 On the Maintenance screen, select “Check of I/O” and
press [●] (Confirm).
2 Use [<] and [>] to select “Digital Output” and press
[●] (Confirm).
3 Use [Λ] and [V] to select the terminal to check and use
[●] (Confirm) to switch the state between ON and OFF.
Check the state of the output destination.