Toshiba RBP-RC001-E - Names of each Part; Included Items; Wiring Specifications; Screw Size of each Terminal

32RCA001TS-02ISEN
7
RBP-RC001-E Installation & Owner's Manual
Names of each part
Name Function
Terminal block for external contact input /
output
Connect the signal wires for external contact input / output
Terminal block for external input / output
power supply
Connect the power supply wires for external contact input / output
Communication terminal block Connect the RS-485 communication wiring
Included Items
Confirm that all the parts listed below are included in the package.
No. Component name Q'ty Remark
1 Group Remote Controller main unit 1
2 Installation & Owner's Manual 1 This manual
3 Fixing screw 4 M4 × 20
4 Fixing screw 4 M3.8 × 16
Wiring specifications
Use the following wiring material to connect signal wires and power supply wires. (Locally procured)
No. Wiring Wire type / wire diameter / wire length
1 For RS485 communication
Shielded twisted pair wire
0.75 mm², up to 100 m
1.25 mm², up to 500m
2 For power supply 2mm², up to 50m
3 For digital I/O Multi-core cable 0.5 mm², up to 100m
Screw size of each terminal
Terminal Screw size
Power terminal / Ground terminal M4
Terminal block for external contact input / output
M3
Terminal block for external input / output power supply
Communication terminal block
Terminal block for external input / output power supply
Communication terminal block
Terminal block for external contact input / output