2 Troubleshooting Procedures
2-70 [CONFIDENTIAL] TECRA S3 Maintenance Manual (960-532)
11. Close all applications and power off the computer.
Procedure 3 Authentication of fingerprint
1. Turn on the computer and start up the Windows.
2. In the Windows Log-ON window, scan the fingerprint of your right index finger. Make
sure that scanned fingerprint is displayed on the frame of [Logon Authentication] in red
and you can not log on.
3. In the Windows Log-ON window, scan the fingerprint of your right index finger. Make
sure that scanned fingerprint is displayed on the frame of [Logon Authentication] in green
and you can log on.
Formatted:
Indent: Left: 0 pt,
Hanging: 14.2 pt, Numbered + Level:
1 + Numbering Style: 1, 2, 3, … +
Start at: 3 + Alignment: Left + Aligned
at: 0 pt + Tab after: 18 pt + Indent at:
18 pt
Formatted:
Indent: Left: 0 pt,
Hanging: 14.2 pt, Numbered + Level:
1 + Numbering Style: 1, 2, 3, … +
Start at: 3 + Alignment: Left + Aligned
at: 0 pt + Tab after: 18 pt + Indent at:
18 pt
To Next Page
Loading...
