Toshiba TOSVERT VF-nC3 User Manual

E6581595
E-22
5
5.13 Setting the electronic thermal
t : Motor electronic-thermal protection level 1
o : Electronic thermal protection characteristic selection
Refer to section 3.5 for details
5.14 Preset-speed operation (speeds in 15 steps)
s -  : Preset-speed frequency 1-7
Refer to section 3.6 for details.
5.15 Standard default setting
t : Default setting
Refer to section 4.3.2 for details.
5.16 Checking the region setting selection
 : Checking the region setting
Refer to section 4.4 for details.
5.17 EASY key mode selection
 : EASY key mode selection
Refer to section 4.5 for details.

Toshiba TOSVERT VF-nC3 Specifications

General

Model	VF-nC3
Category	Inverter
Output Frequency Range	0.1 to 400 Hz
Control Method	V/f control, sensorless vector control
Overload Capacity	150% for 60 seconds
Input Frequency	50/60 Hz
Enclosure Rating	IP20
Input Voltage	200-240V AC
Protection Features	Overcurrent, Overvoltage, Undervoltage, Overheat, Short Circuit
Ambient Temperature	-10°C to +50°C
Communication	Modbus RTU
Cooling Method	Fan Cooled
Operating Temperature	-10°C to +50°C
Storage Temperature	-20°C to +60°C
Humidity	5 to 95% RH (non-condensing)
Altitude	Up to 1000m
Braking Unit	Built-in braking transistor (for models up to 22kW), External braking resistor required