Toshiba TOSVERT VF-nC3 User Manual

E6581595
F-11
6
6.5 Setting frequency command
6.5.1 Switching frequency command
 : Frequency setting mode selection
 -  : Input terminal selection 1A, 2A, 3A, 4A, 5
 -  : Input terminal selection 1B, 2B, 3B, 4B, 1C, 2C
 Function
Frequency command can be changed according to the terminal block input.
Refer to section 5.5 for details.

Toshiba TOSVERT VF-nC3 Specifications

General

Model	VF-nC3
Category	Inverter
Output Frequency Range	0.1 to 400 Hz
Control Method	V/f control, sensorless vector control
Overload Capacity	150% for 60 seconds
Input Frequency	50/60 Hz
Enclosure Rating	IP20
Input Voltage	200-240V AC
Protection Features	Overcurrent, Overvoltage, Undervoltage, Overheat, Short Circuit
Ambient Temperature	-10°C to +50°C
Communication	Modbus RTU
Cooling Method	Fan Cooled
Operating Temperature	-10°C to +50°C
Storage Temperature	-20°C to +60°C
Humidity	5 to 95% RH (non-condensing)
Altitude	Up to 1000m
Braking Unit	Built-in braking transistor (for models up to 22kW), External braking resistor required