System Tools Admin Setup
Configuration Guide
193
2.2 Remote Management
Choose the menu System Tools > Admin Setup > Remote Management and click Add to
load the following page.
Figure 2-2 Configuring Remote Management
In the Remote Management section, configure the following parameters and click OK to
specify the IP subnet and mask for remote management.
Subnet/Mask Enter the IP Subnet and
Mask of the remote host.
Status Check the box to enable the remote management function for the remote host.
2.3 System Setting
Choose the menu System Tools > Admin Setup > System Settings to load the following
page.
Figure 2-3 Configuring System Settings
In the Settings section, configure the following parameters and click Save.
To Next Page
Loading...
