Configuration Guide 66
Configuring Transmission NAT Configurations
2.5 Configuring the NAT-DMZ
Choose the menu Transmission > NAT > NAT-DMZ and click Add to load the following
page.
Figure 2-5 Configuring the NAT-DMZ
Follow these steps to configure the NAT-DMZ:
1) Specify the name of the NAT-DMZ rule and configure other related parameters.
Interface Specify the effective interface for the rule.
Host IP Address Specify the host IP address for NAT-DMZ..
Status Check the box to enable the rule.
2) Click OK.
2.6 Configuring the ALG
Choose the menu Transmission > NAT > ALG to load the following page.
Figure 2-6 Configuring the ALG
Enable related ALG according to your needs and click Save.
To Next Page
Loading...
