Configuring Preferences VPN IP Pool Configuration
Configuration Guide
55
4
VPN IP Pool Configuration
The VPN IP pools configured here can be used as the VPN IP address pools when
configuring L2TP VPN and PPTP VPN.
Choose the menu Preferences > VPN IP Pool > VPN IP Pool and click Add to load the
following page.
Figure 4-1 Add an IP Pool Entry
Follow these steps to add an IP Pool:
1) Enter a name and specify the starting and ending IP address of the IP Pool.
IP Pool Name Enter a name for the IP Pool. Only letters, digits or underscores are allowed.
Starting IP Address/
Ending IP Address
Specify the starting and ending IP address. The range of the IP pool cannot
overlap with the existing IP pools.
2) Click OK.
Note:
An IP pool entry that is being referenced by a rule cannot be deleted.
To Next Page
Loading...
