TK 61753-2-MM-EN
3
When working on transport temperature control systems, a recovery process that prevents or minimizes refrigerant
loss to the atmosphere is required by law. In addition, service personnel must be aware of the appropriate European
Union, National, Federal, State, and/or Local regulations governing the use of refrigerants and certification of
technicians. For additional information on regulations and technician programs, contact your local THERMO KING
dealer.
SSeerrvviiccee TToooollss - Use the proper service tools. Gauge manifold sets should include appropriate shutoff valves or
disconnects near the end of each service line.
RReeccoovveerryy EEqquuiippmmeenntt - Recovery equipment must be used. Proper recovering, storing and recycling of refrigerants is
an important part of all service work.
SSeerrvviiccee PPrroocceedduurreess - Recommended procedures must be used to minimize refrigerant loss.
CCoommppoonneennttss mmaayy bbee iissoollaatteedd by closing service valves and performing system pump-downs.
CCoommppoonneennttss uunnaabbllee ttoo bbee iissoollaatteedd for service must be repaired only after refrigerant is properly recovered.
Customer Satisfaction Survey
Let your voice be heard!
Your feedback will help improve our manuals. The survey is accessible through any internet-connected device with a
web browser.
Scan the Quick Response (QR) code or click or type the web address https://tranetechnologies.iad1.qualtrics.com/jfe/
form/SV_2octfSHoUJxsk6x?Q_CHL=qr&Q_JFE=qdg to complete the survey.
IInnttrroodduuccttiioonn
To Next Page
Loading...
Need help?
General
