Safety18
Operating instructions: Belt conveyor TS 1208
Version 1.6ENG, 10/04/2018
Commissioning
This conveyor system is a "partly completed" machine, as defined by the
Machinery Directive 2006/42/EC, Article 2g.
This partly completed machine may only carry out an intralogistic function
when combined with an appropriate control system and, where applicable,
other (partly completed) machinery. It must not be commissioned until it has
been ascertained that the partly completed machinery which is the subject of
this documentation or the machinery into which it is incorporated comply with
the requirements of the Machinery Directive.
To Next Page
Loading...
