Description
Technical Description
27
Description
The TS 1208 belt conveyor has been specially developed for high load appli-
cations. In combination with other material handling components, this
conveyor with terminal drive is primarily used to efficiently feed flight
baggage to sorters in discontinuous operation. The frame dimensions are
precisely adapted to the TS 6200 angled-belt conveyor. Equipped with a
central drive, the conveyor can be configured with extremely long belts for
high loads. The sturdy and generously dimensioned design of these compo
-
nents allows for loads of up to 50 kg.
Examples of use:
Flight baggage handling systems
Packaging lines
Distribution hubs in trade, the service sector and parcel services
Printing and paper industry
Dry areas in the food and pharmaceutical industry
Original equipment manufacturer for machine- and plant construction
Technical Description
The TS 1208 belt conveyor is driven by a shaft-mounted gear motor in the
terminal drive or by means of a spur gear motor with chain drive in a central
drive station. The nominal width and length can vary over a wide range
depending on the operating requirements. A straight-cut, continuous belt is
deflected on the infeed and outfeed side and adjusted correspondingly by
means of an additional tensioning roller. The construction is based on a
bolted frame made of special aluminium profiles.
To Next Page
Loading...
