Transport and installation
Installing the machine
36
Operating instructions: Belt conveyor TS 1208
Version 1.6ENG, 10/04/2018
Disposal of packaging
The individual components of the packaging are correspondingly marked
and mainly consist of the following materials:
Wood
Cardboard
PP and PE film
Styrofoam
Separate the different materials and dispose of them accordingly. Heed the
local rules and regulations for disposal.
Installing the machine
Surface requirements
The machine may only be installed stationary on a stable concrete surface
(concrete class at least B25 or the corresponding national standard) or on an
equivalent steel structure. The safe working load must be at least 25 N/mm
2
.
The place of installation must be free of vibration and suitable for the static
and dynamic loads. The surface must be level.
If special attachments that enable mobile operation are used, this will be
stated in the performance specifications.
Permissible operating conditions
The required space for operation and maintenance depends on the indi-
vidual requirements.
The place of installation must fulfil the following conditions:
Normal atmosphere (not containing oil or gas, no corrosive components)
Explosion hazard!
The machine is not explosion-protected.
Do not operate the conveyor in potentially explosive atmospheres.
To Next Page
Loading...
