Maintenance and care
Lubricants
52
Operating instructions: Belt conveyor TS 1208
Version 1.6ENG, 10/04/2018
Lubricants
Maintenance schedule
The activities described in the maintenance schedule are based on one-shift
operation.
Provided that they may be carried out by technical personnel as defined at
the beginning, instructions for maintenance can be found in the section enti
-
tled "Repair".It is essential to observe the safety instructions in the respec-
tive section.
Lubricants
Type of lubricant Description
Gear oil See the motor manufacturer's operating instructions
(Appendix)
Lubricating grease ARAL HLP 2, BP Energrease LS-EP 2, ESSO Beacon EP 2,
KLÜBER Staburags NBU 12, KLÜBER Centoplex EP 2,
MOBIL Mobilux EP 2, SHELL Alvania R2
Chain oil OKS 340, OKS 341, BECHEM Berumoly P 73,
BECHEM Berumoly P 80
Event-related (e.g. damaged load) maintenance schedule
Interval Assembly Inspection/Measures
immediate Complete machine Visual inspection:
Any load residues? If so, remove any resi-
dues from the machine.
Foreign matter and foreign objects in the
area of the conveyor belt and the
drums/rollers? If so, remove foreign
matter/bodies from the machine.
To Next Page
Loading...
