Repair
Replacing a side guide
60
Operating instructions: Belt conveyor TS 1208
Version 1.6ENG, 10/04/2018
Fitting the side guide
Carry out the following work steps:
1. Position the side guide on the frame (2).
2. Tighten the joining elements (3) by hand.
3. Position the holder (1) at the markings.
4. Check the distance between the side guide and bed ( 5 - 8 mm).
5. Tighten the joining elements (3).
The side guide has been fitted.
The side guide has been replaced.
To Next Page
Loading...
