TRENDnet TEG-448WS - Product Hardware Features

© Copyright 2013 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TEG-448WS
2
Product Hardware Features
Rear View
• AC Power Connector – Connect the AC power cord to the connector and the
other side into a power outlet. (Input: 100~240VAC, 50/60Hz)
Front View
• Reset Button – Press and hold this button for 10 seconds and release to
reset the switch to factory defaults.
• Gigabit Ethernet Ports (1-48) – Connect network devices. Ports 45-48
are shared with SFP slots 45F-48F and disabled when SFP slots (45F-48F)
are in use and can be used for uplink or downlink connections.
• SFP slots (45F-48F) – Supports optional 1000BASE-SX/LX mini-GBIC
modules.
Diagnostic LEDs
• Power LED
On :
When the Power LED lights on, the device is receiving
power.
Off :
When the Power turns off or the power cord is not
connected
AC Power Connector
Gigabit Ports
(Link/Activity LEDs per port)
Power
LED
Gigabit Ports w/
shared SFP Slots
Reset
Button