TRENDnet TEW-654TR - Installation; Infrastructure Mode

Wireless Travel Router30 Wireless Travel Router30
3. CLIENT MODE
3.1 Installation
Internet
ADSL /
Cable Modem
WLAN AP /
Router
Wireless Station
Printer
Game Console
Network Diagram
The following LED
indicators should be lit...
Power LED (solid)
LAN LED (solid)
WLAN LED (ashing green)
√
√
√
1 Adjust the switch to Client mode. See 1.4.1 Setting the Operating Mode on
page 10.
2 Connect one end of the RJ-45 cable to the travel router and the other end to
the LAN port of the computer or other device.
3 Turn on or plug in the DSL / cable modem and the wireless router.
4 Connect the power adapter to the travel router and plug to an outlet or power
strip. Wait for the travel router to boot.
5 Check the LED indicators to verify connection.
3.1.1 Infrastructure Mode
With infrastructure mode, all clients connect to a central access point (AP), all data
pass through this access point.