TRENDnet TEW-654TR - Wi-Fi Protected Setup (WPS) Settings

Wireless Travel Router60 Wireless Travel Router60
4. ROUTER MODE
Auto-reconnect
Select reconnect option: Always-on, Connect-on Demand, and Manual .
Idle Time Out
Enter the time wherein the travel router will cut off the Internet connection after the
specied period of inactivity (in minutes). This eld is disabled when Auto-reconnect
is Always-on.
MTU
Adjust the MTU (Maximum Transmission Unit) for optimal performance with your ISP.
The default value is 1400.
MAC Address
Enter the MAC address of the computer that was last connected to a modem. To
enter the MAC address of your current computer, click Clone MAC Address.
Once conguration is complete, click Apply to save and apply settings, or click
Cancel to cancel changes. The travel router will restart for new settings to take effect.
Enable
Check the box to enable WPS
function.
Status
Displays WPS status:
UnCongured or Congured.
Wi-Fi Protected Setup (WPS) Settings
Wi-Fi Protected Setup (WPS) is an optional certication program from the Wi-Fi
Alliance that is designed to ease the task of setting up and conguring security on a
wireless network.
device has a WPS PIN number.
Self-PIN Number
Displays the default PIN number of the travel router.
Client PIN Number
Enter the client’s PIN number. This PIN number will be used to communicate with the
travel router to connect to the network.
Start PIN
Click this button to start WPS conguration process if the client device has a WPS
There are 2 methods used in
WPS conguration:
Push Button: If the client
device has a WPS button.
PIN Number: If the client
•
•