Juno Series Handhelds User Guide 59
3. In the Devices tab, tap Add new device. The
handheld searches for other Bluetooth devices
and di
splays them in the list.
4. Tap the name of the device you want to connect
to
and then tap
Next.
The En
ter Passcode screen appears.
5. Tap
Next without entering a passcode.
6. If prompted to add the device to your device list,
ta
p
No.
7. On the handheld, tap the name of the other
d
evice. The Partnership Settings screen appears.
8. If required, change the name of the device in the Di
splay Name field.
9. Select the service(s) you want to use with this device. For example, if you are
c
onnecting to:
– a Bluetooth-enabled phone to connect to the Internet and receive real-time
corrections or download background maps, select Dialup Networking
(DUN).
– a serial device, such as a GeoBeacon receiver or a laser rangefinder, select
Serial Port.
– a computer to access ActiveSync (or WMDC), select ActiveSync.
Note – On
ly ActiveSync shows on the Windows embedded handheld. Select ActiveSync
even if you use the WMDC on the desktop computer.
Note – F
or more information on the types of devices that the Juno series handheld can
connect to, and the supported Bluetooth services, see Connecting to a Bluetooth device as a
client, page 55.
10. Tap
Finish.
11. Tap
OK to close the Bluetooth application.
12. Tap to close the S
ettings screen.
You have now created a partnership between the Juno series handheld and the other
Bl
uetooth-enabled device so that they can communicate. To start using the
connection, you must complete the configuration steps for that type of connection and
then connect to the device. For more information, see:
• Connecting to a Bluetooth-enabled phone for Internet access, page 60
• Connecting to a Bluetooth-enabled serial device, page 65
• Connecting to an office computer using Bluetooth wireless technology, page 66
To Next Page
Loading...