Triumph Adler P-3521 - Using Fax Server to Send a Fax (Fax Server Transmission); Configuring Settings before Sending; Using Fax Server to Send a Fax

5-25
Operation on the Machine > Using fax server to send a fax (fax server transmission)
Using fax server to send a fax
(fax server transmission)
You can send a scanned document through a fax server.
Configuring Settings before Sending
Before sending a fax, the following setting is required.
• Configure the fax server settings.
FAX Server Settings (page 8-18)
Embedded Web Server RX User Guide
Using fax server to send a fax
1
Select the [Send] key.
2
Place the originals.
Place the originals.
3
[▲] [▼] key > [FAX Server] > [OK] key
NOTE
To use this function, you must have a fax server. For information on your fax server, ask your administrator.
Loading Originals (page 5-2)