Machine overview
4.2 Tables (multifunctional table concept)
Aluminum slat cutting table/Acrylic slat cutting table
The cutting table with aluminum slats is mainly used
for cutting thicker materials (up to 8 mm thickness)
and for parts wider than 100 mm. Acrylics can be
cut with no reflections by exchanging the aluminum
with acrylic slats. One can reduce the number of
supporting points by removing slats individually,
depending on the job.
Aluminum cutting grid table
This robust, universal cutting table is characterized
by extremely stable combs and a long lifetime. It is
particularly suitable for cutting tasks with parts smaller
than 100 mm, as these remain in a flat position after
the cut. Compared to the cutting table the aluminum
cutting grid table has more supporting points.
Acrylic slat cutting table
The universal cutting table for the reflection-free
cutting of thin acrylics with a thickness up to 8 mm.
Like with the aluminum cutting grid table parts smaller
than 100 mm remain in a flat position after the cut.
48 ENGLISH (Translation)
To Next Page
Loading...
Need help?
General
