Trotec SP3000 User Manual

Technical Data
Notice
The exhaust power available for the application will be reduced by e. g. bends, small hose
diameters and long hoses.
You should therefore note the following:
– Avoid bends.
– Keep hose as short as possible.
– Use hose diameters as large as possible.
Applications generating large amounts of dust or fumes may require a stronger exhaust system.
Use of separate exhaust systems for head and table exhaust may also be necessary.
In this case it is absolute necessary to consult your distributor.
3.2 Materials
Material
Cutting CO
2
Engraving CO
2
Plastics
Acrylonitrile butadiene
styrene (ABS)
✓ ✓
Acryl/PMMA (Plexiglas®,
Altuglas®, Perspex®)
✓ ✓
Laminate ✓ ✓
Rubber ✓ ✓
Polyamide (PA) ✓ ✓
Polybutylene terephthalate (PBT) ✓ ✓
Polycarbonate (PC) ✓ ✓
Polyethylene (PE) ✓ ✓
Polyester (PES) ✓ ✓
Polyethylene terephthalate (PET) ✓ ✓
Polyimide (PI) ✓ ✓
Polyoxymethylene
(POM) - Delrin®
✓ ✓
Polypropylene (PP) ✓ ✓
Polyphenylene sulfide (PPS) ✓ ✓
Polystyrene (PS) ✓ ✓
Polyurethane (PUR) ✓ ✓
Foam ✓ ✓
ENGLISH (Translation) 43

Trotec SP3000 Specifications

General

Brand	Trotec
Model	SP3000
Category	Tools
Language	English