Setup and installation
6 Setup and installation
Notice
The setup has to be carried out by Technical Support.
6.1 Safety notes
Warning
Risk of injury.
Improper assembly or setup can cause serious injury or damage.
Work may be carried out only by authorized, trained personnel who are familiar with how to
operate the machine and in strict observance of all safety notes.
Warning
Risk of injury.
An incomplete, faulty or damaged machine can lead to serious physical injury or property
damage.
Assemble and install the machine only if the machine and its parts are complete and intact.
Note the following:
■
If the system has been subject to significant temperature fluctuations, it must be brought back to room
temperature before being commissioned.
■
A laser system consists of high-quality electrical and optical components. Mechanical stresses, vibrations
and impacts must always be avoided.
■
Ensure that there is sufficient distance to neighboring machines, walls or other fixed equipment.
■
Keep the work area orderly and clean.
■
Before assembling and installing the machine, check it to make sure it is complete and in good condition.
54 ENGLISH (Translation)
To Next Page
Loading...
Need help?
General
